| new in woodworking |
|
Modern Clock Hands
- (added Jul 4)
Perfect for adding an understated, contemporary feel to your hand-crafted
clocks, this set includes tapered hour,
minute and second hands with beautiful brass finishes. The minute hand has
a 3-3/4" sweep (measured from the center of the hole to the tip). Normally,
the minute hand should extend to the middle of a clock's numbers or minute
marks. For smaller clocks, these hands can be easily trimmed to fit.
(Read more)
3-3/4'' Brass Clock Hands (set) -
$2.29
|
|
Small Spade Clock Hands
- (added Jul 4)
These spade hands offer a sleek, decorative look to your hand-crafted clocks.
Available in either brass or black finishes, each set includes hour, minute and
second hands (second hand does not feature the spade design). Normally, the
minute hand's sweep (measured from the center of the hole to the tip) should
extend to the middle of a clock's numbers or minute marks. In this case, it
measures 3-7/16"
(Read more)
3-7/16'' Brass Clock Hands (set) -
$2.49
3-7/16'' Black Clock Hands (set) -
$2.49
|
|
Sword Clock Hands
- (added Jul 4)
These sword hands lend a classic look to your hand-crafted clocks. Available
in either brass or black finishes, each set includes hour, minute and second
hands (the second hand does not feature the sword design). Normally, the
minute hand's sweep (measured from the center of the hole to the tip) should
extend to the middle of a clock's numbers or minute marks. In this case, it
measures 2-5/8"
(Read more)
2-5/8'' Black Sword Clock Hands (set) -
$2.49
2-5/8'' Brass Sword Clock Hands (set) -
$2.49
|
|
Large Serpentine Clock Hands
- (added Jul 4)
For a classical, decorative feel, adorn your clocks with these serpentine
hands.
Available in either brass or black finishes, each set includes hour, minute and
second hands (second hand does not feature the spade design). Normally, the
minute hand's sweep (measured from the center of the hole to the tip) should
extend to the middle of a clock's numbers or minute marks. In this case, it
measures 3-1/8".
(Read more)
Large Serpentine 3-1/8''Black Clock Hands (set) -
$2.49
|
|
Small Serpentine Clock Hands
- (added Jul 4)
For a classical, decorative feel, adorn your clocks with these serpentine
hands. Available in either brass or black finishes, each set includes hour,
minute and second hands (second hand does not feature the spade design).
Normally, the minute hand's sweep (measured from the center of the hole to
the tip) should extend to the middle of a clock's numbers or minute marks. In
this case, it measures 2".
(Read more)
2'' Brass Small Serpentine Clock Hands (set) -
$2.29
2'' Black Small Serpentine Clock Hands (set) -
$2.29
|
|
Festool Aluminum/Plastic-Cutting Kapex Blade
- (added Jul 4)
This carbide-tipped, triple chip saw blade is designed for cutting non-ferrous metals, especially aluminum. It also works great for acrylics and hard plastics. Like all of Festool’s circular saw blades, it is engineered and designed for cutting efficiency, long-life, and superior cutting results. 260 mm diameter, with a 2.5 mm kerf and a 30 mm bore.
(Read more)
Festool Aluminum/Plastic-Cutting Kapex Saw Blade -
$122.00
|
|
Festool 80-Tooth Fine Tooth Kapex Saw Blade
- (added Jul 4)
This 260 mm diameter carbide-tipped, ATB saw blade is designed for fine cuts in wood and soft plastics. It is especially suited for cutting casing and molding. Like all of Festool’s circular saw blades, it is engineered and designed for cutting efficiency, long-life, and superior cutting results. 2.5 mm kerf. 30 mm bore.
(Read more)
Festool 80-Tooth Fine Tooth Kapex Saw Blade -
$128.00
|
|
Festool Universal 60-Tooth Kapex Saw Blade
- (added Jul 4)
This 260 mm diameter carbide-tipped, ATB saw blade is designed for clean cuts in wood and soft plastics. Like all of Festool’s circular saw blades, it is engineered and designed for cutting efficiency, long-life, and superior cutting results. 2.5 mm kerf. 30 mm bore.
(Read more)
Festool Universal 60-Tooth Kapex Saw Blade -
$115.00
|
|
Ratcheting Hex Key Wrench Set
- (added Jul 2)
The next generation of hex wrenches! On top of a full set of standard hex wrenches, this model boasts an ergonomic ratcheting handle, giving you more leverage for faster and simpler hex bolt manipulation. A convenient switch toggles the wrench’s ratcheting direction for easy transition between tightening and loosening. It folds to a compact 1" x 4" carrying size.
(Read more)
Ratcheting Hex Key Standard and Metric Set -
$14.99
|
|
Festool Domino Sipo Tenons for Outdoor Applications
- (added Jul 2)
As an integral part of Festool's Domino joining system, these specially
designed tenons are weatherproof and resistant to insects and mold.
Like the standard beech Domino tenons, they are 100% rotation proof and
stronger than either biscuits or dowels. They also have a large gluing surface
area for extra strength. Domino tenons are available in five sizes for a wide
range of applications and material thicknesses. Both large and small quantity
packages are available. All Festool Domino tenons are manufactured of wood
from sustainable, cultivated forests.
NOTE: No International shipping on any Festool item. Items
marked "Direct Ship" can only be shipped within the Continental United
States.
(Read more)
Domino Sipo 8 X 22 X 40mm PK/390 -
$70.00
Domino Sipo 8 X 22 X 50mm PK/3 -
$70.00
Domino Sipo 6 X 20 X 40mm PK/5 -
$70.00
More >>
|
|
|
|
