Tightening the locking ring on routers is hard on the hands - especially when groping around under a router table. I finally removed the clamp and drilled it for a steel pin as shown. A light peening on each end of the pin prevents it slipping out. - David Allen, Rockford, Illinois
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|