Moving heavy sheets of plywood or particleboard in and out of my shop is awkward - especially when working alone. My solution was to make a one-wheel dolly as shown in the sketch at left. I designed it for 3/4" sheets, but it is easily shimmed to hold thinner material.
- Rudy Giadrosich
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|